Natural wear and tear can cause wood flooring to lose its glaze and charm over time. In that case, it has to be restored by professionals with sophisticated machinery and technique. Luckily, if you live in the UK, then you can get wood floor restoration in Newcastle or other nearby places.
Restoring wooden floor involves a lot of complicated processes depending on the timber type. It can also be done without the help of professionals but that might get a little tricky and messy.
Professionals use expensive tools and equipment combined with considerable knowledge in this process. So, hiring them for wood restoration is a better idea.
Below are few processes that experts use to restore wooden floor. Read on!
If installed by tongue-and-groove method, the joints of damaged planks need cutting to release them from their position. Professionals in Newcastle or Northumberland usually use a circular saw to cut through these joints.
Next, replacement of old planks takes place with new ones of the same size. This can be tricky because cutting new planks according to the size of the previous ones requires precision.
These planks can be fixed either by drilling holes and fixing with nails and screw. Or, professionals can also use glue for better adherence.
Staining involves applying a solvent to darken or colour the wooden floor.
It primarily starts off with sanding the floor to remove all the sawdust. Next, the floor is wiped using a wet cloth or a mop so that the stain can be easily applied.
After drying the floor for approximately 30 minutes, application of stain happens. The professionals in Sunderland or other places have considerable knowledge about the stains. How to apply and how much to apply to this floor is something they hold expertise in.
Lastly, removal of excess stains and application of polyurethane finish to the floor takes place after the stain has dried.
Sealing is the act of applying lacquers or varnishes to seal the pores on the wood to make it smoother.
Types of Wood sealers:
• Poly sealer – This sealer, considered to be the best, exhibits light fumes, is incombustible, and provides superior adhesion. Application can take place up to 3 times and the floor screening can take place in almost 2 hours.
• Water-based – This sealer is almost same as a poly sealer except it raises wood grains so the floor requires rigorous screening.
• Universal – This sealer is usable with both oil and water based polyurethane but is highly combustible. Performance quality of this sealer is not also up to the mark of water or oil.
To apply this sealer, first, experts clean the floor thoroughly. Then, the application of sealant takes place carefully using brushes or other tools. Also, in this case, professionals have greater knowhow on what sealant to apply and how much to apply so that it does not ruin the floor.
It typically takes 7 to 10 hours to dry after which another coat is applied and dried again. After getting satisfactory results, the floor gets sanded to decrease roughness.
Installation doesn’t relate to wood floor restoration, but its requirement may arise if a large part of the floor needs replacement.
• Tongue-and-groove – This method involves fitting one side of a plank to another side of another plank. The insertion of protruding part of the plank called tongue occurs with the groove part of the other plank.
• Floor connection system – In this installation method, all the planks have a groove in them, joined with each other with rubber, plastic, or even wood.
• Woodloc system – This system involves fitting a plank having a tongue on the upper side to another plank having a tongue on the bottom. The tongues interlock with each other and require an adhesive. This process is also known as a click-lock system.
• Floating – The floating installation process involves laying all the planks on top of another underlay without using glue or nails.
If you too are looking for restoring your old wood floor in Newcastle or other area, then hiring professionals is a better idea. That will ensure a safer and long-time investment.